Fig. 5: Alignment Of The Sensing Face On The Safety Switch - Sick In4000 Direct Bedienungsanleitung

Operating instructions
IN4000 Direct
Fig. 5: Alignment
of the sensing face
on the safety
switch
8012183/YTC9/2016-04-12
Subject to change without notice
Mounting
a
c
e
⋅ Mount safety switch with the aid of a mounting
bracket at the selected mounting location, if possible
so that it cannot be detached, and fasten in the
selected position. Tighten self-locking screws to
1.0 Nm.
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
b
d
f
en
Chapter 4
71