Klarstein Aromatica II Bedienungsanleitung Seite 31

To fill the water reservoir:
1 Open the cover (24).
2 Fill the water reservoir (14) with water up to the required mark on the water level
indicator (15).
3 Do not fill the water reservoir with more water than required for making the coffee.
Only use the amount of water required for making the coffee. The appliance
automatically stops when the water reservoir is empty.
4 Close the cover (24).
Setting the ground coffee fineness (fig. E)
• The ground coffee fineness selector (9) is used for setting the required fineness of
the ground coffee when using coffee beans. It can be set to different positions from
fine coffee grounds to coarse coffee grounds.
• Turn the ground coffee fineness selector (9) to the required position to set the
fineness of the ground coffee.
Removing and fitting the lid of the glass jug
Some appliances are equipped with a glass jug. To remove the lid, proceed as follows:
1
Open the lid in
direction of the arrow.
2
Turn the lid in the
direction of the arrow
to release the left-hand
pin of the lid from the
holder. The lid can now
be removed.
3
First insert the right-
hand pin into the
holder, then turn the
lid in the direction of
the arrow so that the
left-hand pin engages.
Close the lid.
EN
31