Start And Operation; Before Initial Use - Klarstein Aromatica II Bedienungsanleitung

START AND OPERATION

Before Initial Use

• Clean the appliance. Refer to the section "Cleaning and maintenance".
• Clean the accessories. Refer to the section "Cleaning and maintenance".
Setting the clock (fi g. B & C)
If the mains plug is inserted into the wall socket, the display (8) will light to indicate that
the clock can be set. The clock can be adjusted at any time later on.
1 Repeatedly press the hour button (6) to set the hours.
2 Repeatedly press the minute button (7) to set the minutes.
3 The time is shown on the display (8).
Use
CAUTION:
Risk of scalding! Keep your hands, face and other body parts away
from the steam hole. The steam from the appliance becomes very hot
during use. Do not cover the steam hole.
• The appliance can be used for making coffee with coffee beans or ground coffee.
• Before fi rst use, the appliance is set to make coffee with coffee beans.
• After each use, the appliance will memorise the last used setting for the next use:
making coffee with coffee beans or making coffee with ground coffee.
Note: The appliance can only be used when the display is activated. If the display is
not activated, press any button to activate the display. The appliance is ready for use.
Setting the coffee quantity (fi g. B & C)
• The coffee quantity selector (3) is used for setting the required coffee quantity. It can
be set to 2, 4, 6, 8 or 10 cups.
• Repeatedly press the coffee quantity selector (3) to set the coffee quantity. The
number of cups (A) is shown on the display (8).
• Aroma function: Long press the coffee quantity selector (3) to enter the "AROMA"
stage, the icon lights up and the heating tube is heated up at intervals.
EN
27