TERMA MEG Gebrauchsanweisung Seite 8

Electric Heating
Element
Safety requirements
— installation
1. Fitting and connection of the heating element should
only be performed by a qualified installer.
2. Connect the unit to a sound electrical installation (see
the ratings on the heater).
3. Switching on the heating element in the open air to test
the device is permitted for a maximum of 3 seconds.
4. Never test a heating element that is already in- stalled.
Do not turn the heating element on in an empty
radiator!
5. Ensure that the power cord does not touch the hot
parts of the heating element or radiator.
8
User manual MEG, DRY, MOA, REG 2, REG 3 www.termaheat.pl