Safety Systems - Zummo Z14 nature Bedienungsanleitung


If fruits are too large for the Fruit Classifier, the fruit will not fall into the Cup. If fruits are otherwise
too small, numerous pieces of fruits will fall at the same time into the Cup.

We recommend to switch off the machine when is not in use (fig. 5).

If the orange has a very thin peel, we recommend that you add a washer to each of the squeezing
balls (fig. 10).

6.11. SAFETY SYSTEMS

The machine has various safety systems:
1 If the exterior basket is incorrectly positioned, the machine will not work and the display
panel will show Error. The basket will appear shaded intermittently.
2 If the Front Cover is not assembled or is improperly assembled, the display will show an
Error message with the Front Cover and Hopper symbols flashing.
3 If the tray is not assembled or is not in place, the machine will not operate, and the display
will show an Error message by displaying a flashing dark tray.
4 If one of the containers is incorrectly positioned, the machine will not work and the display
panel will show Error. The corresponding bin/chute will appear shaded intermittently.
5 If for any reason the machine gets blocked during operation, after a few seconds the motor
will stop automatically and the display will show an Error message with a faulty flashing
icon, until the cause of the blockage is removed.
6 Thanks to a thermal protection system in the motor, in the event of overheating the machine
will stop and the display will show an Error message and a thermometer icon. In this case,
please wait approximately 10 minutes to allow the motor temperature to decrease. The error
message will disappear. Please check that the ventilation gratings are not obstructed.
34