Vortice VORT HR 350 AVEL Betriebsanleitung Seite 21

ENGLISH
off: bypass deactivated
permanently alight: bypass opened manually
blinking: bypass opened automatically via software (in this case the bypass cannot be closed manually)
19. indoor temperature, degrees Celsius
20. view outdoor temperature, degrees Celsius
21. Boost active
On/off (NO UK) (fig.18
1 18 18
FILT
1 2 3
esc
Prg
/ °C
By-Pass
Set time/day (NO UK or models with HA) (fig.19)
1 19 19
FILT
1 2 3
esc
Prg
/ °C
By-Pass
Select speed (fig.20)
Before proceeding with the steps indicated below, press the
ESC button to exit and return to the initial menu. The
operating speed is preset during appliance configuration,
and can be selected by pressing the UP button briefly
(1=min. speed, 2=med. speed, 3=max. speed).
P1 P2 HA
4 5 7
6
set
P1 P2 HA
4 5 6 7
set
The appliance is switched on and off by pressing and holding
the "down" button on the panel.
Before proceeding with the steps indicated below, press the
ESC button to quit and return to the initial menu.
The current time and day can be set as follows:
- press the "up" and "down" buttons together briefly
- press the "up" or "down" button repeatedly to select the
"hours" setting (HH);
- press the SET button briefly to retain the "hours" setting and
move on to the "minutes" setting (MM);
- press the "up" or "down" button repeatedly to select the
"minutes";
- press the SET button briefly to retain the "minutes" setting
and move on to the "day" setting (dAy);
- press the "up" or "down" button repeatedly to select the
"day" setting;
- press the SET button briefly to retain the "day" setting and
quit.
2 20 20
FILT
1 2
esc
/ °C
By-Pass
P1 P2 HA
3 4 5 6 7
set
Prg
21