Attachment Sets - Kärcher HD 7/16-4 ST Originalbetriebsanleitung

Remote controls
1 Upgrade kit, remote re-
lease*
2 Upgrade kit for remote
control, HD simple*
3 Upgrade kit coin remote
control*
4 Upgrade kit priority switch* 2.638-200.0
5 Upgrade kit control elec-
tronics, multi remote con-
trol*
6 Upgrade kit operating sta-
tion, multi remote control
7 Upgrade kit emergency
stop*
8 Upgrade kit junction box
9 Upgrade kit, connection
box for remote release
Attachment kits
1 Upgrade kit pressure relief 2.209-773.0
2 Upgrade kit, single deter-
gent for low-pressure op-
eration*
3 Upgrade kit, double deter-
gent for low-pressure op-
eration*
4 Upgrade kit, single deter-
gent in high pressure
mode*
5 Upgrade kit, double deter-
gent in high pressure
mode*
6 Upgrade kit for water sof-
tening (DGT)
7 Upgrade kit hourmeter
8 HWE 860
9 Upgrade kit floor rack St
10 Upgrade kit floor rack VA
11 Upgrade kit solenoid valve
for water inlet
* upgrade kit junction box required
**The appliance has standard detergent dispensing in low pressure mode, which is activated by switching the triple nozzle.

Attachment sets

2.637-491.0 1 operating point. Restoring the operation readiness after the readiness period has
elapsed. Several operating stations can be used parallelly.
2.744-014.0 1 operating point. Actuation of the high pressure pump and up to two detergent. Use
of 2 operating stations or one operating station and one coin remote control (item 3)
in connection with the priority switch (item 4).
2.642-422.0 Coin remote control. Actuation of the high pressure pump and up to two detergents
after coin insertion.
Switching between 2 remote controls (item 2) or one remote control (item 2) and one
coin remote control (item 3).
2.744-036.0 Actuation of the high pressure pump and two detergents from up to 6 operating sta-
tions (item 6). Additional connectivity for a coin remote control (item 3).
2.744-015.0 Operating station for multi remote control (item 5).
2.744-002.0 Interrupts the mains supply to the system.
2.744-798.0 Is needed to connect the upgrade kits (item 1) through (item 7) to the appliance.
Completely wired, connection via connectors on the appliance.
2.209-807.0 Required to connect the upgrade kits remote release (item 1) and emergency stop
(item 7).
Relieves the high pressure system of pressure after the readiness period has
elapsed.
2.209-779.0 Necessary when selecting one detergent via the remote control. Consists of 1 sole-
noid valve and 1 level sensor**.
2.209-780.0 Necessary when selecting a second detergent via the remote control (optional for
item 5). Consists of 1 solenoid valve, 1 level sensor and 1 dispensing valve.
2.209-799.0 Allows the dispensing of detergent in high pressure mode. Is necessary to actuate
a detergent via a remote control. The appliance has standard detergent dispensing
in low pressure mode, which is activated by switching the triple nozzle. When install-
ing this upgrade kit, you will not need to switch over with the triple nozzle.
2.209-800.0 Allows the dispensing of detergent in high pressure mode. Is necessary to actuate
a second detergent via a remote control. The appliance has standard detergent dis-
pensing in low pressure mode, which is activated by switching the triple nozzle.
When installing this upgrade kit, you will not need to switch over with the triple noz-
zle.
2.209-777.0 Prevents lime buildup in hot water mode by dispensing softener liquid.
2.209-778.0 Captures the operating times of the appliance to be able to keep the maintenance
intervals.
3.070-036.0 Heats the supplied water using an electrically heated boiler.
2.210-058.0 To install the appliance when a wall mount is not possible.
Steel model, painted.
2.210-059.0 To install the appliance when a wall mount is not possible.
Stainless steel model, rustproof.
2.209-788.0 Interrupts the water supply during appliance standstill.
12
-
EN 29