Attachment Sets - Kärcher HD 7/16-4 ST-H Handbuch

Remote controls
1 Upgrade kit, remote re-
lease*
2 Upgrade kit for remote con-
trol, HD simple*
3 Upgrade kit coin remote
control*
4 Upgrade kit priority switch* 2.638-200.0
5 Upgrade kit control electron-
ics, multi remote control*
6 Upgrade kit operating sta-
tion, multi remote control
7 Upgrade kit emergency
stop*
8 Upgrade kit junction box
9 Upgrade kit, connection box
for remote release
Attachment kits
1 Upgrade kit pressure relief 2.209-773.0
2 Upgrade kit, single deter-
gent for low-pressure opera-
tion*
3 Upgrade kit, double deter-
gent for low-pressure opera-
tion*
4 Upgrade kit, single deter-
gent in high pressure mode*
5 Upgrade kit, double deter-
gent in high pressure mode*
6 Upgrade kit for water soften-
ing (DGT)
7 Upgrade kit hour meter
8 HWE 860
9 Upgrade kit floor rack St
10 Upgrade kit floor rack VA
11 Upgrade kit solenoid valve
for water inlet
* upgrade kit junction box required
**The appliance has standard detergent dispensing in low pressure mode, which is activated by switching the triple nozzle.

Attachment sets

2.637-491.0 1 operating point. Restoring the operation readiness after the readiness period has
elapsed. Several operating stations can be used parallelly.
2.744-014.0 1 operating point. Actuation of the high pressure pump and up to two detergent. Use
of 2 operating stations or one operating station and one coin remote control (item 3)
in connection with the priority switch (item 4).
2.642-422.0 Coin remote control. Actuation of the high pressure pump and up to two detergents
after coin insertion.
Switching between 2 remote controls (item 2) or one remote control (item 2) and one
coin remote control (item 3).
2.744-036.0 Actuation of the high pressure pump and two detergents from up to 6 operating sta-
tions (item 6). Additional connectivity for a coin remote control (item 3).
2.744-015.0 Operating station for multi remote control (item 5).
2.744-002.0 Interrupts the mains supply to the system.
2.744-798.0 Is needed to connect the upgrade kits (item 1) through (item 7) to the appliance. Com-
pletely wired, connection via connectors on the appliance.
2.209-807.0 Required to connect the upgrade kits remote release (item 1) and emergency stop
(item 7).
Relieves the high pressure system of pressure after the readiness period has elapsed.
2.209-779.0 Necessary when selecting one detergent via the remote control. Consists of 1 sole-
noid valve and 1 level sensor**.
2.209-780.0 Necessary when selecting a second detergent via the remote control (optional for item
5). Consists of 1 solenoid valve, 1 level sensor and 1 dispensing valve.
2.209-799.0 Allows the dispensing of detergent in high pressure mode. Is necessary to actuate a
detergent via a remote control. The appliance has standard detergent dispensing in
low pressure mode, which is activated by switching the triple nozzle. When installing
this upgrade kit, you will not need to switch over with the triple nozzle.
2.209-800.0 Allows the dispensing of detergent in high pressure mode. Is necessary to actuate a
second detergent via a remote control. The appliance has standard detergent dis-
pensing in low pressure mode, which is activated by switching the triple nozzle. When
installing this upgrade kit, you will not need to switch over with the triple nozzle.
2.209-777.0 Prevents lime buildup in hot water mode by dispensing softener liquid.
2.209-778.0 Captures the operating times of the appliance to be able to keep the maintenance in-
tervals.
3.070-036.0 Heats the supplied water using an electrically heated boiler.
2.210-058.0 To install the appliance when a wall mount is not possible.
Steel model, painted.
2.210-059.0 To install the appliance when a wall mount is not possible.
Stainless steel model, rustproof.
2.209-788.0 Interrupts the water supply during appliance standstill.
12
-
EN 29