Assembling The Unit - Vari FM33 Originalbetriebsanleitung

Operate the vehicle only when it
is in good technical condition as
stipulated and delivered by the
manufacturer.
Before all work on this
appliance
To prevent injury,
performing any work
maintenance and adjustments)
on this unit
- switch OFF the engine,
- wait until all rotating parts
have come to a standstill,
- pull out the mains plug,
- leave motor to cool down
(approx. 30 minutes)
After working with the
appliance
Before leaving the unit, always
pull out the mains plug.
Safety devices
Figure 1
!
Danger
Never use a lawnmower if it has
damaged safety devices or if
there are no safety devices fitted.
Safety lever (1)
The safety lever stops the motor
and cutting blades
emergency. There must be no
attempt to circumvent
function, which is crucial for your
personal safety.
Ejection flap (2) or impact
protection (3)
The ejection flap/impact
protection protects you
being injured by the blade or by
ejected solid objects.
lawnmower must always
operated with the ejection flap or
impact protection.
Symbols on the appliance
On the appliance you will find
various symbols on adhesive
labels. They have the following
specific meanings:
before !
(e.g.
Keep
away from the danger
area!
in an
this
from
The
be
Always keep these symbols on
the appliance in a legible state.
Attention! Please
read the operating
instructions before
putting lawnmower
into operation!
third parties
Before working on
the cutters, pull out
the mains plug! Keep
fingers and feet
away from the
cutting tools! Before
adjusting or cleaning
the unit or before
checking whether the
connection cable is
entangled or
damaged, switch off
the unit and pull out
the mains plug. Keep
the connection cable
away from the tools.
Keep connection
cable away from the
cutters!
Never put your
hands and/or feet in
the vicinity of rotating
parts.
Appliance classes
Class II
double insulated
2
Symbols in the user's
guide
Symbols are employed in the
user's guide to indicate hazards
or draw attention to important
information. They have
following specific meanings:
!
Danger
Draws your attention to sources
of potential danger associated
with the task you are undertaking
at the time which constitute a
danger to persons
.
Caution
Used to highlight hazards which
are associated with the activity
that is being described, whereby
damage could occur to the
appliance.
Note
This indicates
information and application tips.
Disposal instructions
Dispose of packaging remnants,
old units, etc., in accordance with
local regulations.
Old
equipment is recyclable
and should therefore
not be thrown in the
dustbin!
We request that you support us
with your active contribution in
the conservation of resources
and protection of the environment
and to dispose of this unit at
collection points, if available.

Assembling the unit

Illustration on the enclosed sheet
show you how to assemble your
unit in a few steps and make it
ready for use.
the
important
electrical