Maintenance Schedule - Kärcher SHD-R 3000 Originalbetriebsanleitung

Time Appliance
type SHD-R
3000 (F)
1, 2, 4, 10 hours after – LM
initial start-up – SLA
– SSR
Once after the first All
100 operating hours
All
weekly or after 40 All
operating hours
– Standard
– S/SVA
– SLA
– SSR
– LM
All
monthly or after 160 – Standard
operating hours – S/SVA
– Standard
– S
Every 200 operating – LM
hours
half-yearly or every – Standard
500 operating hours – S/SVA
– SLA
– SSR
Every 1000 operat- All
ing hours
annual All
All

Maintenance schedule

Activity
Retension plug bushing.
Check the tension of the V-
belt.
Oil change
Check oil level.
Check oil condition.
Check oil condition.
Check high-pressure hoses. Visual check of high pressure hoses for mechanical
Check pump for leaks.
Relubricate
Oil change
Oil change
Test
Check the tension of the V-
belt.
Test
EN
Performance
See Maintenance tasks
See Maintenance tasks
See Maintenance tasks
The oil level must lie between the MIN and MAX mark-
ings; else refill.
If the oil is milky white, perform an oil change and tighten
piston seal (see Maintenance Procedures).
If the oil is diluted or discoloured, perform an oil change
and tighten piston seal (see Maintenance Procedures).
damages such as scraping, visible hose duck, bends,
porous and cracked rubber. Replace damaged high
pressure hoses.
Tension piston seal if more than 5 drops of cleaning liq-
uid leak from the pump per minute.
Relubricate using 2 shots of lubricant with the grease
gun.
See Maintenance tasks
See Maintenance tasks
– Check and clean the pump valves.
– Check piston.
– Replace seal set if necessary.
– Oil change
– Function test
See Maintenance tasks
Inspection as per regulation "Working with liquid spray-
ing units".
13
-
of whom
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Operator
Customer
Service
Operator
Technical ex-
pert
33