IKEA FROSTFRI Handbuch Seite 10

ENGLISH
After selection of the mode or the
Temperature button the
animation starts
After selection of the
temperature the animation
flashes for a few minutes.
Switching on
Connect the mains plug to the power
socket.
Press the appliance ON/OFF button if the
display is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set
default temperature.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature refer to
"Temperature regulation".
If DEMO appears on the display, refer to
"Troubleshooting".
If the door remains open for
some minutes, the light will turn
off automatically. The light is
reset by closing and opening the
door itself.
Switching off
Press the ON/OFF symbol for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from the
power socket.
Bar indicators
The bars guide the user when interacting
with the unit and indicate at what level the
unit is performing. The bars indicate:
• which compartment is in focus (active),
when animation stops
• the desired temperature on the scale
.
• whether the set temperature is higher or
lower than the previous one (increasing
or decreasing animation).
Temperature regulation
Set the temperature of the freezer by
pressing the temperature button.
The default temperature is -18°C for the
freezer.
The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
Fast Freeze function
If you need to decrease the temperature in
the freezer rapidly, use Fast Freeze mode
which allows the food to keep all its
qualities untouched
To switch on the function:
1. Select the freezer compartment.
2. Press the Mode button until the
corresponding icon appears.
The Fast Freeze shuts off automatically
after approximately 52 hours.
To switch off the function before its
automatic end:
1. Select the freezer compartment.
2. Press the Mode button in order to select
an other function or press the Mode
button until you can see none of the
special icons.
The function switches off by
selecting a different freezer set
temperature.
Bottle Chill mode
The Bottle Chill mode is to be used to set an
acoustic alarm at the preferred time, useful
for example when a recipe requires to cool
down a mixture for a certain period of time,
10