Intelligent Stagnation Flush - WimTec SMART HYPlus Montage- Und Bedienungsanleitung

SMART
Function description

Intelligent stagnation flush:

DIP switch 4
Serves to flush water supply lines in order to remove stagnant
water that accumulates during longer periods of disuse.
'ON' position = Intelligent stagnation flush is enabled (default setting).
'OFF' position = Intelligent stagnation flush is disabled.
0,5 - 24 h
10 - 180 s
HyPlus
Flushing interval
Specifies the time span between the
stagnation flushing processes.
Adjustable from 0,5 to 24 h via the
interval control (see page 20).
Minimum flushing duration
Specifies the minumum waterflow
duration within the set time interval.
Adjustable from 10 to 180 s via the
minimum flushing duration control
(see page 20).
Intelligent stagnation flush
If the fitting has not been in use at least for
the minimum flushing duration, an automa-
tic flush for the remaining duration will be
actuated.
Otherwise no automatic flushing will occur.
Washbasin fitting
ON
OFF
1 2 3 4 5 6
Minimum flushing
duration visualizati-
on see page 27!
WimTec SMART
HyPlus
EN
Tip i
25