Intelligent Stagnation Flush; Stagnation Flush Time - WimTec LOFT Montageanleitung Und Bedienungsanleitung

LOFT
Function description
Intelligent stagnation fl ush:
DIP switch 4
Serves to rinse water supply lines in order to remove stagnant water that
accumulates during longer periods of disuse.
'ON' position =
Intellligent stagnation fl ush is enabled.
'OFF' position =
Intellligent stagnation fl ush is disabled (default setting).
Flushing interval
Can be set from 3 – 48 h at
the interval control, default
setting 24 h (see p. 18).
3 - 48 h
Stagnation fl ush time:
DIP switch 5
You can select one of two predefi ned stagnation fl ush times (10 or 20 s).
'ON' position = Stagnation fl ush time is set to 20 s.
'OFF' position = Stagnation fl ush time is set to 10 s (default setting).
Intelligent stagnation fl ush
If the fi tting has not been
used for the set period, an
automatic fl ushing is perfor-
med for the duration (see
DIP 5) confi gured.
10 / 20 s
WimTec LOFT
Washbasin fi tting
EN
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
23