Preparing The Coating Material - WAGNER FineSpray Betriebsanleitung

GB
Translation of the original operating instructions
Before using the attachment, read these operating instructions and familiarise
yourself with the operating instructions for the basic unit. The safety instructions
for the basic unit apply to this FineSpray spray attachment.
The FineSpray spray attachment has been especially developed for the application of
low-viscosity materials. The FineSpray spray attachment can be used with all devices with
the CLICK&PAINT SYSTEM.
Coating materials suitable for use
Mordants, glazes, impregnations, oils and other low-viscosity materials
Coating materials not suitable for use
Viscous materials
Interior wall paint (dispersions and latex paint)
Materials that contain highly abrasive components, facade paint, caustic solutions and
acidic coating substances.
Flammable materials.

Preparing the coating material

Observe the manufacturer's instructions for the use of the coating material
on the paint tin or on the technical instruction sheet.
An absolute precondition for the trouble-free operation of the fine-spray system is that
the coating material is uncontaminated. If you have doubts as to the purity of the coating
material, we recommend that you first filter it through a fine sieve.
COATING MATERIAL
Mordants, glazes,
impregnations, oils
4
PROCESSING
undiluted
COMMENTS
Use red feed tube filter
FineSpray