Values - Daikin RoCon+ HP Betriebsanleitung

7 Parameter settings
Parameters Setting range
Min / Max
BPV -
3UVD -
Temperat- -
ureA2
Tliq2 -
Quiet mode Inactive
Active
Active at night
Heating sup- Off
port
On
Tab. 7-27 Parameter in menu: "Overview"
7.7.2

Values

[→ Main menu → Information → Values]
Parameters Setting range
Min / Max
Feed temper- 0 – 100 °C
ature current
Feed temper- 0 – 90 °C
ature setpoint
Average ext. -39 – 50 °C
temperature
Hot water 0 – 100 °C
temperature
current
Hot water 10 – 70 °C
temperature
setpoint
Current return 0 – 100 °C
flow temperat-
ure
Current 0 - 5100 l/h
volume flow
Feed temper- 0 – 100 °C
ature HC cur-
rent
Feed temper- 0 – 90 °C
ature HC set-
point
Status heat Off
circulation
On
pump
Mixer Position -
Heat gener- -
ator type
Software Nr -
B1/U1
Software no. -
controller
Tab. 7-28 Parameter in menu: "Values"
Operating Instructions
46
Description
Current position of 3UVB1 mixing valve (0%: heating network; 100%: in-
ternal bypass)
Current position of the 3UVDHW mixing valve (0% heating network; 100%
hot water storage tank)
Current outside temperature in °C (on optional outside temperature
sensor)
Current refrigerant temperature °C
Status of the Quiet mode
Status of the heating support
Description
The current feed temperature of the heat generator (t
The current target temperature of the heat generator is displayed in °C.
The current outside temperature is displayed in °C.
The current temperature of the hot water storage tank is displayed in °C. If
no hot water function is activated, "- - -" is displayed.
The current target temperature for domestic hot water preparation is dis-
played in °C. If no hot water function is activated, "- - -" is displayed. Here,
the current target value is always the maximum value of all requests relev-
ant for this hot water circuit.
The current return flow temperature of the heat generator is displayed in
°C. If no respective sensor is connected to the heat generator, "- - -" is dis-
played.
The filtered value of the current volume flow is displayed.
The temperature of the direct HC (t
port, otherwise t ) in °C.
V1
The (feed) target temperature of the direct HC is displayed in °C.
The current status of the internal circulation pump of the heat generator is
displayed.
Only 5xx: The current position of the 3UVDHW 3-way mixing valve in % is
displayed.
The configured type of the heat generator is displayed.
The software and version of the operating unit are displayed.
The software number and version of the control PCB are displayed.
) is displayed in °C.
V1
is displayed with active heating sup-
V2
Factory Incre- Access
setting ment
BE HF
- - S S
- - S S
- - S S
- - S S
- - S S
- - S S
Factory Incre- Access
setting ment
BE HF
- 1 °C S S
- 0.1 °C S S
0.1 °C S S
- 0.1 °C S S
- 0.1 °C S S
- 0.1 °C S S
- l/h S S
- 0.1 °C S S
- 0.1 °C S S
- - S S
- 1% S S
- - S S
- - S S
- - S S
Daikin RoCon+ HP
Daikin Controller RoCon+ HP
008.1444299_01 – 09/2018 – EN