Setting Setpoints; Setting The Times; Calendar Function - Daikin RoCon+ HP Betriebsanleitung

3 Operation
Fig. 3-5 List with selected list entry
Example: Switch the operating mode to "Summer" [→ Main menu
→ Operating mode]
1 Turn the rotary button clockwise until the "Summer" list entry is
displayed in blue.
2 Briefly press the rotary button to confirm ("OK").
è The box is ticked in the "Summer" list entry.
3 Turn the rotary button anticlockwise until the Back icon turns
blue.
4 Briefly press the rotary button to confirm ("OK").
è The setting is saved and the setting level is exited.
3.3.4

Setting setpoints

The setpoint of a parameter can be changed within the displayed
scale. Press "OK" to save the new value. Press and hold the rotary
button to exit the setting level without saving. For some parameters
there is an "Off" setting in addition to values on the scale. This set-
ting can be selected by turning the rotary button anticlockwise after
the minimum value of the scale has been reached.
Fig. 3-6 Display of the parameter setting
Item Designation
1 Minimum value
2 Default value
3 Currently selected value
4 Maximum value
Tab. 3-6 Elements in the parameter setting display
Operating Instructions
10
Example: Set [Room temperature setpoint 1] to 22 °C [→ Main
menu→ User → Room → Room temperature setpoint 1]:
1 Turn the rotary button clockwise until 22 °C is displayed.
2 Briefly press the rotary button to confirm ("OK").
è The setting is saved and the setting level is exited.
3.3.5

Setting the times

The clock function is used to set the current time.
Fig. 3-7 Setting the times
Example: Set the time to 16:04 [→ Main menu → Settings → Dis-
play → Time]:
1 Turn the rotary button clockwise until the circle is displayed in
blue.
2 Briefly press the rotary button to confirm ("OK").
è The hour hand is displayed in blue.
3 Turn the rotary button clockwise until 16:00 is displayed.
4 Briefly press the rotary button to confirm ("OK").
è The minute hand is displayed in blue.
5 Turn the rotary button clockwise until 16:04 is displayed.
6 Briefly press the rotary button to confirm ("OK").
è The Confirm icon in the menu bar is displayed in blue.
7 Briefly press the rotary button to confirm ("OK").
è The setting is saved and the setting level is exited.
3.3.6

Calendar function

The calendar function is used to set the current date or the [Vaca-
tion] and [Holiday] time programs. The calendar function allows the
selection of a time period for the time programs.
Daikin RoCon+ HP
Daikin Controller RoCon+ HP
008.1444299_01 – 09/2018 – EN