Installation And Removal Of Exhaust Hose - Sharp CV-P10PR Bedienungsanleitung

INSTALLATION AND REMOVAL OF EXHAUST HOSE

Installation of the exhaust hose
1
Attach the insect guard net to the
window adapter.
Push the insect guard net firmly to en-
sure that four projections on the window
adapter fit into the four holes on it.
2
Attach the window adapter to the
exhaust hose.
Extend one end of the exhaust hose and
insert it into the window adapter, and
turn it (approx. three times) until it stops.
Make sure they are securely attached.
3
Attach the rain guards to the in-
sect guard net.
Insert all three projections on each rain
guard into the holes in the insect guard
net.
Side "A" will now be at the top, as indi-
cated in the diagram.
Window adapter
Exhaust hose
Horizontally placed
Insect guard net
Projection
Vertically placed
Rain guard
Insect guard net
Hole
Projection
EN-6
Hole
Extend
Insect guard net
Hole
Rain guard
"A"
"A"