To Change Air Flow Direction; Max Density Operation - Sharp CV-P10PR Bedienungsanleitung

USE FOR ION GENERATOR

TO CHANGE AIR FLOW DIRECTION

UP / DOWN AIR FLOW DIRECTION
1
Press the SWING button.
• The horizontal louvers will swing.
2
Press the SWING button again to stop the
desired position.
CAUTION:
Never attempt to adjust the horizontal louvers manually.
• Manual adjustment of the horizontal louvers can cause the
unit to malfunction when the remote control is used for ad-
justment.
LEFT / RIGHT AIR FLOW DIRECTION
Hold the vertical louver as shown in the diagram
and adjust the air fl ow direction.

MAX DENSITY OPERATION

The unit releases max density Plasmacluster ions. By continuously discharging "extra high"
airfl ow for 30 minutes, the unit discharges the ions throughout the room more effectively.
1
Press the MAX DENSITY button during Ion
generator operation.
• The remote control will display " ".
• The red MAXIMUM lamp will light.
TO CANCEL
Press the MAX DENSITY button again.
• The red MAXIMUM lamp will turn off.
NOTES:
• You cannot set the fan speed during MAX DENSITY opera-
tion.
• The MAX DENSITY operation will be automatically can-
celled in 30 minutes, and the unit will return to the original
settings.
• MAX DENSITY operation and REFRESH operation can not
be used together.
EN-16
1
2
1