Main Unit Operation; Drainage - Sharp CV-P10PR Bedienungsanleitung

MAIN UNIT OPERATION

Use this operation when the remote control is not available.
1
Press the POWER button to start opera-
tion.
• The mode will change as you press the button
within 5 seconds.
COOL
(The green AIR CON lamp will light)
ION GENERTOR
(The blue ION GENERATOR lamp will light)
OFF
• In cool mode, the unit will operate at its last
cooling settings. If the unit has been unplugged
since it was last operated, it will resume oper-
ation in the cooling mode, set at 20˚C. The fan
speed set to AUTO.
TO TURN OFF
Press the POWER button during opera-
tion.

DRAINAGE

Drain out water within the unit in the following cases.
• When the unit stops operating and the orange TIMER lamp, the green AIR CON lamp
and the red MAXIMUM lamp are blinking, the water tank is full and need to be drained.
• When the unit is not used for a long time.
1
Unplug the power plug and carefully move
the unit to a drain or outside to avoid wa-
ter spilling out into the room.
2
Remove the stopcock from the drainpipe,
and drain water within the unit.
3
Attach the stopcock securely to the drain-
pipe.
EN-18
1
Stopcock
Drainpipe