Installation; Installation/Removal Of Barn Doors And Filter Frame - Cameo TS 100 WW Bedienungsanleitung

INSTALLATION

Thanks to its four rubber feet, the spotlight can be positioned in a suitable location on a level surface. Mounting to a traverse is possible
with the pre-installed mounting bracket (A) and a suitable traverse clamp (optional). Ensure firm connections and secure the spotlight to the
securing lug (B) with a suitable safety cable. Use the side-mounted lever screws (C) to adjust the vertical beam angle.
Important: Overhead mounting requires extensive experience, including the calculation of the load limit values of the installation material
and regular safety inspection of all installation materials and spotlights. If you do not have these qualifications, do not attempt to perform an
installation yourself. Refer instead to a qualified professional.
A
B
C

INSTALLATION/REMOVAL OF BARN DOORS AND FILTER FRAME

To install or remove the barn doors and the filter frame please click on the spring-loaded locking pin (D) and fold the bracket upwards. Then
return the bracket to its original position so that the locking pin engages.
D
9