Hafele DT 100 Montage- Und Bedienungsanleitung Seite 63

9. Place the lower part of the cover on the bracket in such a way that the
cover guides are located in the rails of the bracket.
10. Press the upper part of the cover back on the bracket, until it audibly
snaps into place. Take care not to damage the sensitive plug-in con-
nections.
11. Place the door levers on the spindle in such a way that the setscrews
point in the direction of the strike plate.
12. Tighten the setscrews.
Replacement of the batteries has been completed. The DT 100 is again
ready for operation.
Mounting and Operating Instructions
DT 100 - Status: 087.2011 - 732.29.137 63