Hafele DT 100 Montage- Und Bedienungsanleitung Seite 42

6. Remove the door lever from the external spindle.
The DT 100 is adapted for a right-facing door lever.
Proceed as follows if the pins have been inserted in the wrong side:
Ö Remove the 8 screws in the mounting plate.
Ö Remove the mounting plate from the bracket.
Ö Pull the pins out of the bracket, using pliers if necessary.
Ö Place the mounting plate on the bracket.
Ö Tighten the screws.
Ö Repeat the adaptation process.
Open electronic components!
Ö Do not damage them.
42 DT 100 - Status: 08.2011 - 732.29.137
Mounting and Operating Instructions