Hafele DT 100 Montage- Und Bedienungsanleitung Seite 46

Mounting the spindle socket
coloured marking
The square spindle has to be mounted to the clutch part in such a way,
that the groove for the grub screw points in the correct direction. The col-
oured marking of the clutch part will either show upwards or down-
wards.
The flawless function of the clutch is achieved only, if the clutch part
inside is positioned correctly! After mounting the system to the door, the
coloured marking must always either show upwards or downwards!
46 DT 100 - Status: 08.2011 - 732.29.137
Mounting and Operating Instructions
Square socket with groove
dutch part
Door handle with
inside
headless screw