Hafele DT 100 Montage- Und Bedienungsanleitung Seite 53

4. In order to set the turning direction of the door lever, turn the cam disc
in the battery mounting to the right or left limit stop.
The magnet of the cam disc points towards the strike plate.
In simple operating mode the cam disc may be removed completely.
This increases the lifetime of the batteries.
5. Place the battery mounting on the spindle socket and attach the con-
nection cable plugs to the electronics of the battery mounting.
6. Place the battery mounting on the mounting plate. Ensure that the
connection cable is not pinched between the two plates.
Mounting and Operating Instructions
DT 100 - Status: 087.2011 - 732.29.137 53