Herunterladen Inhalt Inhalt Diese Seite drucken

Ossur TOTAL KNEE 2000 Gebrauchsanweisung Seite 8

Geometric locking system
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
Patient Weight
50-70 kg (110-155 lbs)
70-90 kg (155-200 lbs)
90-100 kg (200-220 lbs)
• Re-install the bumper cover by hooking the groove under the chassis
front and pushing the two pins into the chassis holes.
• Active patients may require a stiffer bumper
• Patients who have previously worn a prosthesis without a stance-
flexion feature may initially prefer a stiffer bumper.
• We suggest trying a softer bumper after two weeks of trial. This helps
the patient develop a security with the knee. Doing this will also help
make the transition to the stance-flexion characteristic more
acceptable.
STATIC ALIGNMENT
For safety, please make initial adjustments with patient standing between
parallel bars!
• Fit prosthesis and check for correct length.
• Make sure foot is flat on the floor, knee is in neutral position and
socket angles are correct.
• When the patient shifts weight onto the prosthesis, the geometric lock
is activated and the bumper should be slightly compressed. Modify
alignment if necessary.
• Explain function of stance flexion/geometric lock to patient. Ask
patient to activate it by stepping forward with prosthesis and
transferring weight onto heel.
• Patient should become accustomed to activating geometric lock and
resulting stance flexion movement.
• Knee cannot collapse as long as geometric lock is activated.
• Preset swing flexion resistance, Valve F (15, Figure 9)
a. Sit patient on chair. Extend prosthetic knee. Let it fall into flexion.
b. Increase resistance of Valve F until a small bump observed at 60°
flexion angle.
DYNAMIC ALIGNMENT
The model 2000 knee provides smooth and fluid swing control during
normal ambulation and allows changes in cadence.
For safety, please make initial adjustments with patient standing between
parallel bars!
Valve adjustment – F, H, E (Figure 9)
Valve
Factory setting Function
¾
Valve F
¾
Valve H
Valve E
1½ open
Use small flathead screwdriver for adjustment.
8
Affects swing flexion resistance from 60°-
open
160° (fast walking only)
Affects swing flexion resistance from 0°-
open
60° (slower walking)
Affects whole swing extension resistance,
160°- 0°
Colour
Black
Red
Yellow
Type
Regular
Firm
Extra Firm

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis