Cola TERMOFIRE L Anleitung Seite 39

TERMOFIRE L fire door opening
Fire door opening-closing
handle;
- Opening: clockwise
- Closing: anticlockwise
1.5 Permissible use and fuel
The pellet insert uses exclusively pellets in various types of wood complying with Standard DIN plus 51731 or UNI
EN 14961-2 or Ö-Norm M 7135 i.e. having the following characteristics:
Heat value
Density
Moisture
Diameter:
Ash percentage
Length:
Composition:
Packing
The pellet hopper is located at the back of the insert.
To load the pellets, in the basic version, operate with the unit off and cold, proceeding as follows:
- open the fire door with special key provided,
- use the key on the latch to release the monoblock,
- with the special grip located on the frame, pull the monoblock all the way out on the guides,
- load pellets using a scoop, without overloading the hopper,
- close the monoblock, making sure the latch is engaged.
Pullout monoblock
min 4.8 kWh/kg (4180 kcal/kg)
680-720 kg/m3
max 10% weight
6 +0.5 mm
max 1.5% weight
min 6 mm- max 30 mm
100% untreated wood from the wood industry or post consumer without added binding
substances or bark, complying with current regulations
in bags made from environmentally friendly or biodegradable material or paper
To open the door, fit the handle
supplied and turn it clockwise
Fixed base
Pull grip
Locking latch
39 TERMOFIRE L