Operation / Control; Components And Accessories; Maintenance And Care - G-U ELTRAL KS 30/40 EASY TR Montage- Und Bedienungsanleitung

10 Operation / Control

For reversing the running direction, the drive must be de-energized for at least 1 s.
Switch-off in closed position
Thanks to the integral load interruption, the drive switches off in closed position. Setting the
limit switch is therefore not required. When the end position is reached, the drive carries out a
reverse travel of approx. 1 mm, thus relieving both gaskets and fastening brackets.

11 Components and accessories

Chain drive ELTRAL KS 30/40 EASY TR
ELTRAL KS 30/40 EASY TR - 230V
ELTRAL KS 30/40 EASY TR - 24 V
*= color: 1 = grey (RAL7047); 6 = black (RAL9005); 7 = white (RAL9016)
Accessories for chain drive ELTRAL KS 30/40 EASY TR
(Examples of use see section „17 Examples of use" on page 28)
Chain holding bracket, standard
Chain holding fixture, standard
Chain holder for top hung sash
Chain holder set for top hung sash – small
Pivoting bracket set for roof lights
Bracket set for sash mounting
Quick release fastener set
Testing and setting apparatus
* = colour: 1 = grey (RAL 7047), 6 = black (RAL 9005), 7 = white (RAL 9016)
Euro-Solid catch stays
K-17915-00-0-8
K-17915-01-0-8
K-18046-00-0-8
For installation see application diagram
º œ
The installation of the catch stays may require a profile-related base plate, see order catalogue.
º œ
Fastening kits vary depending on installation method, profile system, and profile material.
º œ

12 Maintenance and care

To ensure the trouble-free operation of the opening system, it is necessary that the following
maintenance jobs should be carried out after every 1000 opening cycles or at least once a year:
C heck all screws for tight fit and retighten where necessary.
º œ
Verify if the window sash fits correctly in the frame. Readjust the window fittings, if necessary.
º œ
Check all parts for damage and wear. Replace them where necessary.
º œ
Never use alcaline or acidic cleaning detergents. Do not immerse the appliance in water.
º œ
Do not try to repair a defective drive by yourself. Never remove the housing or other
º œ
components. In case of signs of damage to the appliance contact the manufacturer.
Only spare parts supplied by the manufacturer may be used for repair.
02.2013 | G27021 | Printed in Germany
(for aluminium or timber windows without lateral locking point), size 0
(for aluminium or timber windows without lateral locking point), size 1
(for timber windows with lateral locking point)
K-18171-01-0-*
K-18170-01-0-*
9-44261-00-0-*
9-44262-00-0-*
9-44272-00-0-*
K-17441-00-0-*
K-17440-00-0-*
K-17720-00-0-*
K-17438-00-0-8
K-17736-00-0-6
25