Intended Use; Description Of Eltral Ks 30/40 Easy Tr - G-U ELTRAL KS 30/40 EASY TR Montage- Und Bedienungsanleitung

Assembly and operating instructions
ELTRAL KS 30/40 EASY TR
Chain drive
3

Intended use

The chain drive ELTRAL KS 30/40 EASY TR is designed to open and close tilt, top hung, side
hung, horizontal and vertical pivot windows, rooflights and small domes exclusively.
Other use is considered unintended use.
Gretsch-Unitas GmbH Baubeschläge do not take liability for damage arising from non-compliant
use.
In the case of non-compliant use, the guarantee is extinguished.
All deliveries are made on the basis of our General Terms and Conditions
4

Description of ELTRAL KS 30/40 EASY TR

The chain drive ELTRAL KS 30/40 EASY TR is designed for use in dry rooms at an ambient
temperature from -5°C to max. +65°C.
It can be installed either horizontally or vertically.
One ELTRAL KS 30/40 EASY TR set consits of:
• Chain drive with connecting cable, length 2 m
• Standard pivot bracket
• Pivot bracket for top hung sash with drive mounted to the frame
• Chain holder for tilt sash, chain holder for top hung sash
• Package with locking piece and connecting pin
• Drilling template
• Assembly and operating instructions
The following installation variants are possible:
• mounted on the frame
• mounted on the sash.
Type label
Note!
The type label is attached to the motor.
º
With the motor installed, the type label is not visible.
18