Preparing To Install - G-U ELTRAL KS 30/40 EASY TR Montage- Und Bedienungsanleitung

Min. sash high
Installation method
Frame mounting on tilt window inward
Sash mounting on tilt window inward
Frame mounting on top hung window
Note!
Smaller sash heights:
º
please contact us if smaller sash heights are required.
6

Preparing to install

Incorrect use may cause injury to people and damage
DANGER
to property
Please refer to the type label of the motor and the technical data in section
„5 Technical data for 1 motor" on page 19 to ensure that your have se-
lected the right motor for your installation situation.
Examine the delivered equipment immediately upon receipt and check it for possible
º œ
transport damage. Do not install the motor if it is damaged
Note! Tilt windows must be rebated (sash overlap > 0 mm) to provide for their
º
safe closing (see picture below).
02.2013 | G27021 | Printed in Germany
Travel
185 mm
600 mm
400 mm
300 mm
>= 0 mm
Travel
305 mm
1100 mm
700 mm
500 mm
21