Intended Use; Description Of Eltral K25 And Eltral K25 Synchro - G-U ELTRAL K60 24 V Montage- Und Bedienungsanleitung

Assembly and Operating Instructions
ELTRAL K25 - 230 V · ELTRAL K25 Synchro - 230 V
Chain Drive
3

Intended Use

The chain motors ELTRAL K25 and ELTRAL K25 Synchro are intended exclusively for opening
and closing of tilt, top hung, turn, tilt-and-turn, and pivot windows. Any other use, or use beyond
this, is considered unintended use.
Gretsch-Unitas GmbH Baubeschläge is not responsible for damages arising from unintended
use.
4

Description of ELTRAL K25 and ELTRAL K25 Synchro

The chain motor ELTRAL K25 and ELTRAL K25 Synchro is intended for use in dry rooms with a
maximum permitted ambient temperature of +75° C.
Installation is done in a horizontal position.
An ELTRAL K25 set consists of:
• Chain drive with connection cable, length 3 m,
• Assembly and operating instructions.
An ELTRAL K25 Synchro set consists of:
• 2x chain drive with connection cable, length 3 m,
• Assembly and operating instructions.
The following installation variants are possible:
• Attached to the frame,
• Attached to the shaft.
• concealed in the frame
NOTE Type label
º The type label is attached to the motor. In the installed condition, it might
no longer be recognised. Note the specifications!
Replacement
For the K25 230 V Synchro, the complete set does not have to be changed in case of replace-
ment. It is sufficient to replace the defective motor. In your order, please specify the drive type
of the motor (master or slave).
20