Wet Vacuum Cleaning - Kärcher NT 45/1 Tact Te Ec Bedienungsanleitung

Inserting the paper filter bag
 Release and remove the suction head.
 Insert the paper filter bag or the mem-
brane filter (special attachment).
 Insert and lock the suction head.

Wet vacuum cleaning

Inserting the rubber lips
 Remove the brush strips (4).
 Insert the rubber lips (5).
Note
The structured side of the rubber lips must
point outwards.
Remove the paper filter bag
10
English
– If the appliance is used to vacuum wet
dirt the paper filter bag or the membrane
filter (special accessory) must always
be removed.
– It is recommended to use a special filter
bag (wet) (see Filter systems).
Warning
The flat pleated filter must must always be
in place while vacuuming.
– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle, or if water is
sucked up from a container, it is recom-
mended to deactivate the "automatic fil-
ter cleaning" function.
– If the maximum liquid level is reached
the appliance will turn off automatically.
– In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
– After having completed the wet vacuum
operation clean the flat pleated filter, the
electrodes and the container and let
dry.
Clip connection
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.