Herunterladen Inhalt Inhalt Diese Seite drucken

Start Up; Lp Appliances; Inserting The Waste Hose; Operation - Kärcher IVS 100/55 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für IVS 100/55:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Insert the suction hose into the suction
hose connection.
 Attach the desired accessoried to the
suction hose.
 Ensure that the vacuum material con-
tainer has been inserted properly.
Warning
The highest allowed net impedance at the
electrical connection point (refer to techni-
cal specifications) is not to be exceeded.
In case of confusion regarding the power
impedance present on your connection,
please contact your utilities provider.

LP appliances

LP appliances are equipped with a waste
hose system.
Devices with a waste hose system are not
suitable for wet vacuum cleaning.

Inserting the waste hose

 Remove all 4 loops of the waste hose
(length: 22 m).
 Open the intake by a rotation to the left
and pull it out towards the bottom.
 Insert the waste hose as shown in the il-
lustration.
 Insert the intake and lock it by clockwise
rotation.
 Pull down the waste hose 40-50 cm.
 Close the end of the waste hose by
means of a cable tie.
16

Start up

After vacuuming moist or liquid substanc-
es, observe the notes in chapter "Changing
from wet vacuuming to dry vacuuming".
 Insert the appliance plug into the mains
socket.
 Turn the On/Off switch to "1".
IVS 100/55 and IVS 100/75
 Insert the appliance plug into the mains
socket.
 Turn the On/Off switch to "1".
 Press "Switch-on appliance" button.

Suction process

 Perform the suction process.
 Regularly check the filling level in the
dirt receptacle, since the device does
not switch off automatically.
 Empty the vacuum cleaner waste con-
tainer as necessary (described in the
chapter "Emptying the vacuum cleaner
waste container").
 If necessary, clean or replace the filter
(described in chapter "Care and mainte-
nance").

Wet vacuum cleaning

ATTENTION
Risk of damage! Devices with a waste hose
system are not suitable for wet vacuum
cleaning.
Caution: Constantly monitor the fill level
in the dirt receptacle when vacuuming
high volumes of liquid, as the receptacle
can be filled within a matter of seconds
and could overflow.
 On completion of wet vacuum cleaning:
Dry the filter. Clean the container with a
moist cloth and dry it off.
– 4
EN

Operation

IVS 100/40

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis