Metz mecablitz 44AF-2 digital Bedienungsanleitung Seite 99

Introduction
Thank you for choosing a Metz meca-
tech product.
We are delighted to welcome you as a
customer.
You will of course be impatient to start
using the flash unit.
However, it is worthwhile reading the
operating instructions and learning
how to use the unit correctly.
Proper Use
This flash unit is intended solely for
taking pictures of motifs in the photo-
graphic field. It may be operated only
with the accessories described in this
instruction manual or the accessories
approved by Metz mecatech.
The flash unit may not be used for any
purpose other than that described abo-
ve.
The 44AF-2 flash unit is built in seven
different versions and accordingly suit-
able for:
• Digital Canon cameras (EOS and
PowerShot) with TTL-, E-TTL- and
E-TTL-II - flash metering.
• Digital Nikon cameras with TTL and
i-TTL flash control.
• Olympus - Digital cameras with TTL
flash control and flash socket system,
as well as the compatible digital
cameras from Panasonic and Leica.
• Digital Pentax cameras with P-TTL
flash control and system flash shoe.
• Digital Samsung cameras with A-TTL.
• Digital Sony reflex cameras with
TTL preflash and ADI metering.
• Digitale FUJIFILM System-Kameras
with TTL flash control.
The flash unit is not suitable for use
with other brands of cameras!
A subsequent system change (e.g.
Canon to Nikon) is not possible, even
with an additional adapter
Take a look at the diagrams at the end
of the manual.
k
+ +
99