Correct Exposure Display; Flash Mode Display; Indication Of Light Output - Metz mecablitz 44AF-2 digital Bedienungsanleitung

4.2 Correct exposure display

With Samsung cameras is an exposure
indicator not possible.
When the shot is correctly lit in TTL ope-
rating modes, the correct exposure is
displayed by means of the button
lighting up red for 3 seconds.
If there is no correct exposure message
after the shot, it was underexposed
and you must select the next smallest f-
stop (e.g. f-stop 8 instead of 11) or
decrease the distance to the subject or
reflective surface (e.g. for bouncing
flash) and take the shot again.

4.3 Flash mode display

The configured operating mode will be
shown by the appropriate illuminated
LED e.g. TTL mode.

4.4 Indication of light output

The four red LEDs above the buttons
display the following information:
- Partial flash light output in "M" mode
- Illumination of the video light in "LED"
mode
- Firmware status at turn on (only when
activated).
1/1 1/2 1/8 1/32
k
+
109