Monitoring The Radio Contact; Restoring Factory Settings - switel BC-207 Bedienungsanleitung

4.9

Monitoring the radio contact

The radio contact between the parent unit and the baby unit is monitored continuously. When there is a good connection, the
green LINK indicator light (7/14) on the parent and baby unit illuminates.
If you have moved the parent unit too far away from the baby unit or if the baby unit is switched off, the green indicator light will
flash and you will hear a warning tone every 30 seconds. After this, the indicator light will flash red and you will hear a warning
tone every 30 seconds.
Note: The warning tone for loss of radio contact cannot be switched off. However, the warning tone can be silenced for 3 minutes
by pressing any button on the parent unit.
4.10

Restoring factory settings

The factory settings can be reset individually on the parent and baby unit.
Switch on the parent or baby unit.
While all the indicators are on, press the volume button
carried out after a few seconds.
Factory settings, baby unit
Volume: Step 3
- Operation -
(3/15) immediately until you hear a signal tone. The reset will be
Factory settings, parent unit
Volume: Step 1
Sensitivity Step 5
55