Inserting The Batteries - switel BCE15 Bedienungsanleitung

4. Transmitter unit with 9 V power adapter plug (contained in the
material supplied) or with a 9 V battery.
5. Receiver unit with 9 V power adapter plug (contained in the
material supplied) or with a 9 V battery.
6. Receiver unit with volume control
7. Low power consumption and low HF radiation
8. Transmitter unit and receiver unit each with a belt clip
6 Starting Up

1. Inserting the batteries

Only use batteries bearing the CE certificate
S
Open the battery compartment as illustrated in Fig. II.
S
Insert a 9 V battery in both the transmitter unit and the receiver
unit, paying attention to the correct polarity.
S
Close the battery compartment.
The batteries need not be removed from the transmitter/re-
ceiver unit when they are operated using the power adapter
plugs.
2. Operating using the power adapter plug
Only use adapters which bear a CE certificate
S
Connect the power adapter plug to the 9 VDC jack on the
transmitter unit and to the power socket.
S
Connect the power adapter plug to the 9 VDC jack on the
receiver unit and to the power socket.
S
Set the channel selector on the transmitter and receiver units to
the same channel (A or B).
25