Loading The Battery; Talkback Function - switel BCF 867 Bedienungsanleitung

2
Monitor Setup
2
.1
Power Supply
The monitor uses 3.7V 700mAh (Li-ion) battery or the household AC power
current.

Loading the Battery

1. Open the battery compartment cover on the rear of the monitor. See Fig. 5.
2.
Insert the battery with the metal facing the battery compartment. See Fig. 5.
3.
Close the battery compartment cover, and make sure it is locked securely.
4.
Press the POWER button
Note 1: When power is sufficient, the "Power LED will light up (green light).
Note 2: Press and hold the Power button over two seconds to turn off the
Note 3: Remove the battery from the monitor if you do not plan to use it for
Using AC Power
1.
Plug one end of the provided power adapter into a wall outlet and the other
end into the monitor, the "Power" LED will appear red. See Fig. 6.
Note : Use the adapter labeled OUTPUT: 6V DC with the monitor.
2.
Press the POWER button
Note 1: When power on the monitor, "Power" LED will appear orange
Note 2: Press and hold the Power button over two seconds to turn off the monitor.
Note 3: When power on and charging starts, and battery status will appear
2

Talkback Function

.2
Press the talkback button
monitor.
a prolonged period of time.
status will appear
LED will appear red. If charging is finished (fully charged) the "Power"
LED will turn green.
to turn on the monitor. See Fig. 5.
to turn on the monitor. See Fig. 6.
. If charging is finished (fully charged) the battery
. When power off and charging starts, and "Power
to speak through the camera unit. See Fig. 7.
"
"
3