Functions Of The Thread-Machine; Overview (Fig. A); Functional Description; Accessories - Rothenberger COLLINS CLASSIC 22A Bedienungsanleitung

3 Functions of the thread- machine
3.1 Overview
1
Pipe cutter
2 Thread- jaws
3 Internal deburrer
4
Tool carriage
5 Oil drainage screw
6
Feeder hand wheel
3.2

Functional description

Threads are cut or turned on workpieces such as pipes or rods in the thread- machine
COLLINS CLASSIC 22A.
The machine consists of:
-
a drive motor that rotates both clamping chucks
-
a automatic double clamping chuck for securing the workpiece
-
a pipe cutter (1) for cutting the workpiece to length
-
an internal deburrer (3)
-
a thread- head (10) for making a thread on the workpiece
-
an oil pump that lubricates and cools with thread- oil
-
a tool carriage (4) guided on both sides with a toothed feed
-
a chip collecting and oil trough
-
a safety pedal
-
a coasting restrictor
3.3

Accessories

The relevant accessories and an order form can be found from Page 98 onwards.
4

Preparations for operation

4.1 Transporting the thread- machine
Bend at the knees when lifting the machine so as to protect your back against
over-stressing.
Fix the tool carriage so that it cannot move while the machine is being transported.
Hold the machine securely by its base to lift it. Do not hold the machine by its
centring chuck or the internal deburrer when carrying it!
If the machine is transported with the thread- oil still inside, the oil might splash
out onto clothing due to vibrations!
Thread- oil on the surface of the machine makes it slippery. Ensure that it does
not slip out of your hands when you lift it!
24
7
Foot switch
8 Central lubrication system
9 T.O.R.-switch
10 Die head
11 Stand (optional)
ENGLISH
A