Technical Data; Function Of The Equipment; Overview (Fig. A); Start Of Operation - Rothenberger RODIACUT 131 DWS Bedienungsanleitung

2

Technical Data

Dimensions ( L x W x H ) in mm
Drill stroke max.:
Drilling range using the 1800 DWS drill motor
Drilling range using the 2400 PD drill motor
Drilling depth without extension:
Motor receptacle
Weight
3

Function of the equipment

3.1

Overview (Fig. A)

1 Locking device for feed gear
2 Motor receptacle
3 Guide column
4 Depth stop
5 Ring bolts
6 Borehole centre indicator
7
Toggle drilling angle adjustment
8 Base plate
9 Ventilation button
10
Feed unit
As the system consists of coordinated components, please only use original ROTHENBERGER spare
parts, accessories and diamond drill bits in order to enable optimum efficiency of the equipment
at all times.
3.2

Start of operation

Positioning:
Please pay attention to the position of the ring bolts (5) Ring bolts must not overlap
the lower edge of the base plate.
Measure borehole and mark the centre.
Fold out the borehole centre indicator (6) and adjust and fasten the base plate (8)
The respective optimum fastening possibility depends on the building site conditions (see
fastening possibilities, item 3.3)
You can achieve the final fine alignment or adjustment of the drill rig by tightening the four
ring bolts (5) with the aid of both spirit levels (18)
Every time before start of operation make sure that the drill rig is firmly fastened
and not able to shake.
RODIACUT 131 DWS
430 x 250 x 750mm
450mm
Ø10 – Ø 131mm
---
300 or 400 mm
Ø 56 / 60 mm
10 kg
11 Hand adapter
12 Adjusting screws guide bars
13 Hand grip
14 Star handle motor receptacle
15 Motor receptacle stop position
16 Support
17
Transport wheels
18 Levels
19 Borehole for water extraction ring
ENGLISH
RODIACUT 202 DWS
620 x 240 x 970mm
650mm
---
Ø30 – Ø 202mm
300 or 400 mm
Swallowtail guide
14,5kg
11