Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
FOOTSWITCH
31
(31) Remote Cable
An eight-pin DIN connector is provided for connecting the footcontroller to the amplifier IN/FOOT (38) via the
cable included in the carton.
(32) Preset Mode
Switches the footcontroller between NORMAL mode (default, LED off) and PRESET mode (LED red). Other
LEDs will be red for Preset Mode, and green for Normal Mode. (See "Using Preset Mode" section on pg. 10)
(33) Effects Loop 1 / Preset # 1
NORMAL mode: This turns on Effects Loop 1.
PRESET mode: This selects Preset 1. If selected, the LED will be lit red.
(34) Effects Loop 2 / Preset # 2
NORMAL mode: This turns on Effects Loop 2.
PRESET mode: This selects Preset 2. If selected, the LED will be red.
(35) Gate / Preset # 3
NORMAL mode: This turns on the gate circuit when using Channel 2 or 3.
PRESET mode: This selects Preset 3. If selected, the LED will be red.
(36) MIDI CC4 / Preset #4
NORMAL mode: This will send MIDI controller 4 with data 0 (LED off) or 127 (LED on) to control external
MIDI gear.
PRESET mode: This selects Preset 4. If selected, the LED will be red.
32
33
34
37
38
39
35
36
40
41
9
Werbung
Inhaltsverzeichnis
