Page GB-18
Care and maintenance
Care and maintenance
WARNING
Risk of injury!
Before cleaning the exhaust hood or
■
changing the fi lter, pull out the mains
plug. If the mains plug is diffi cult to
access, switch off or pull out the cor-
responding fuse.
CAUTION
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fi re.
Grease residue on the exhaust hood
■
or in the grease fi lters can catch fi re
if exposed to high temperatures. For
this reason, clean the surfaces of the
exhaust hood and grease fi lters reg-
ularly.
Cleaning the housing
NOTICE
Risk of damage to property!
Do not use any sharp objects or scour-
■
ing powders, as these can scratch the
surface.
We recommend cleaning the surfaces of the
exhaust hood after every use.
• Wipe the surfaces with a soft, damp cloth
and a little dishwashing detergent.
• Clean glass surfaces with standard glass
cleaner.
Cleaning the grease filters
NOTICE
Risk of damage to property!
Handle the grease fi lters carefully to
■
avoid bending or creasing the fi ne
mesh.
Only reinsert the grease fi lter after
■
cleaning once it is fully dry.
Clean the grease filter once a month – or
more frequently if necessary – in the dish-
washer (up to 60 °C), or soak in lukewarm
water with detergent.
1. Unplug the mains plug or switch off the
corresponding circuit.
(19)
2. Open the cover (19).