Safety Information; Safety Notes - Renkforce DL-1008 Bedienungsanleitung

4. Safety Information

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with
these operating instructions. We do not assume any liability for consequential damage!
We do not assume any liability for property damage and personal injury caused by improper
use or non-compliance with the safety instructions. In such cases the guarantee/warranty will
expire!
Dear Customer: The following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not
permitted.
• This device is a protection class I product. The only permissible voltage source is a properly
grounded mains socket (100-240 V/50/60 Hz) of the public mains.
• The mains socket must be close to the device and easily accessible.
• Anyone operating, installing, setting up, commissioning or servicing this effect beamer must
be trained and qualified properly and observe these operating instructions.
• Never look straight into the light source during operation. The bright light flashes may tem-
porarily impair your eyesight. Apart from this, epileptic fits may be triggered under certain
circumstances in persons sensitive to such lights. This particularly applies to epileptics.
• The product belongs to LED risk group 2. The scope of delivery includes LED notice signs in
different languages. If the notice sign on the product is not in your local language, attach the
corresponding sign to your device.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye.
Therefore, familiarise yourself with the statutory regulations and measures of precaution for
the operation of this kind of LED device before using the device.
• Never touch the mains plug with wet or damp hands. There is a risk of potentially fatal electric
shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
on all poles (e.g. via the respective circuit breaker and FI switch) and then carefully pull the
mains plug from the mains socket. Separate the mains cable from the device and replace it.
Never use the product if the mains cable is damaged.
• When mounting the product, make sure that the power cord is neither jammed nor damaged
by sharp edges.
Possibly hazardous optical radiation emitted from this product.
Risk Group 2
CAUTION
21