Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Information - Renkforce DL-LED107S Bedienungsanleitung

Led-par-strahler
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. Safety Information

In case of damage caused by non-compliance with these operating instructions, the warranty/
guarantee will expire. We do not assume any liability for consequential damage!
Nor do we assume any liability for damage to property or personal injury caused by improper
use or failure to observe the safety instructions. In such cases the guarantee/warranty will
expire!
Dear Customer: The following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not
permitted.
• This device is a safety class 1 product. The only permissible voltage source is a proper groun-
ded mains socket (100-240 V/50/60 Hz) of the public mains.
• The mains socket must be close to the device and easily accessible.
• Anyone operating, installing, setting up, commissioning or servicing this effect beamer must be
trained and qualified properly and observe these operating instructions.
• Never look straight into the light source during operation. The bright light flashes may tem-
porarily impair your eyesight. Apart from this, epileptic fits may be triggered under certain
circumstances in persons sensitive to such lights. This particularly applies to epileptics.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye.
Therefore, familiarise yourself with the statutory regulations and measures of precaution for
the operation of this kind of LED device before using the device.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal elec-
tric shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
(e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains
socket. Separate the mains cable from the device and replace it. Never use the product if the
mains cable is damaged.
• When installing the device, make sure that the mains cable is not squeezed or damaged by
sharp edges.
• This product is not a toy and not suitable for children. Children cannot judge the dangers invol-
ved when handling electrical devices.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device
or in its vicinity. Liquids may get into the housing and impair electrical safety. This also poses
great danger of fire or potentially fatal electric shock! If this is the case, first power down the
respective mains socket (e.g. switch off circuit breaker) and then pull the mains cable from the
socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis