Logging In To The Machine - Canon imageRUNNER C1028i Handbuch

Logging in to the Machine

This section describes the operation procedures for the log-in methods provided by
the uniFLOW integration.
NOTE
When the optional MiCard Reader is attached to the machine, you can log in and log
out by holding your ID card over the MiCard Reader, regardless of the applied log-in
method (except when the department ID and password is applied as the log-in
method).
Entering a User ID and Password
Enter your user ID and password to log in when the screen shown in step 1 is
displayed.
NOTE
To log in to the machine, you must have a valid user ID and password (if set)
registered. For instructions on how to register a user ID and password in the uniFLOW
server, see the documentation included with the uniFLOW software.
1
Enter your user ID and password
(up to 32 characters respectively)
using the software keyboard and
- (numeric keys).
❑
Use [ ], [ ], or (Scroll Wheel) to
select <User ID:> ➞ press [OK] ➞ enter
your user ID.
❑
Use [ ], [ ], or (Scroll Wheel) to
select <Pass:> ➞ press [OK] ➞ enter the
password.
The characters that you enter for the
password are displayed as asterisks
(********).
❑
Press the right Any key to select
<Login>.
You can also press
log in.
Logging in to the Machine
(Log In/Out) to
EN-8