Canon imageRUNNER C1028i Handbuch Seite 18

Using the ID Card
Use your ID card to log in when the screen shown in step 1 is displayed.
IMPORTANT
Logging-in by using the ID card is available only when the optional MiCard Reader is
attached to the machine.
1
2
When your operations are complete, hold your ID card over the
MiCard Reader until the log-in screen shown in step 1 appears.
You can also log out of the machine by pressing
EN-11
Logging in to the Machine
Hold your ID card over the
MiCard Reader until the screen
switches to the next log-in step
or the main menu.
❑
If a screen prompting you to select the
cost center appears, select the
appropriate cost center using [ ], [ ],
or (Scroll Wheel).
• Press the left Any key to select
<Parent/Sub> to move to the parent or
sub level of the cost centers.
• Press the right Any key to select
<Menu>. From the menu, you can use
the options below:
- <Display Log> enables you to select
the cost center from the history.
- <Search> enables you to search the
cost centers.
❑
Press [OK].
The main menu appears on the display.
(Log In/Out).