Canon imageRUNNER C1028i Handbuch Seite 19

Entering a Department ID and Password
Enter your department ID and password to log in when the screen shown in step 1
is displayed.
IMPORTANT
This log-in method is available only when "Authentication to the Machine" (p. EN-3) is
applied as the authentication mode.
NOTE
To log in to the machine, you must have a valid department ID and password (if set)
registered. For instructions on how to register a department ID and password in the
uniFLOW server, see the documentation included with the uniFLOW software.
1
NOTE
• If no password is set for the department ID, leave <Password:> blank.
• If you make a mistake when entering the department ID/password, press
enter the correct department ID/password.
• If the department ID/password that you entered is incorrect, an error message will
appear.
Enter your department ID and
password (up to 7 digits
respectively) using
(numeric keys).
❑
Use [ ], [ ], or (Scroll Wheel) to
select <Dept. ID:> ➞ press [OK] ➞ enter
your department ID.
❑
Use [ ], [ ], or (Scroll Wheel) to
select <Password:> ➞ press [OK] ➞
enter the password.
The numbers that you enter for the
password are displayed as asterisks
(*******).
Logging in to the Machine
-
(Clear) ➞
EN-12