Changing The Bulb; Cleaning And Maintenance - Silvercrest Z31498 Bedienungshinweise Und Sicherheitshinweise

A djusting the grinding level
T urn the adjustable screw
receive a finer grinding level (see fig. C).
T urn the adjustable screw
receive a coarser grinding level (see fig. C).
Turn the top of the device and press the switch
to remove residues from the grinding mechanism.
Note: Choose a coarser setting if the grinding
mechanism stops rotating when you are using a very
fine setting. If the grinding mechanism still refuses to
rotate, then it may be choked or blocked. Unscrew
the adjustable screw and loosen the grinding
8
mechanism. Release the stuck pieces by shaking the
grinding mechanism, then tighten the adjustable
screw again.
8

Changing the bulb

R emove the batteries before you change the
bulb . In this way you will ensure that the
9
salt and pepper mill is not turned on by acci-
dent while you are changing the bulb
Note: Use only bulbs of the same type as the
bulb supplied. Otherwise the product may be
damaged.
H old the base with container
facing upwards as shown in Figure C.
R emove the broken bulb
carefully out of the socket.
I nsert the new bulb.

Cleaning and maintenance

U nder no circumstances should you use liquids
or detergents, as these will damage the device.
T he device should only be cleaned on the
outside with a soft dry cloth.
6 GB/IE
clockwise to
8
anticlockwise to
8
Contact your local refuse disposal authority for
2
more details of how to dispose of your worn-out
product.
Faulty or used batteries must be recycled in accord-
ance with Directive 2006 / 66 / EC. Please return
the batteries and / or the device to the available
collection points.
.
9
Batteries may not be disposed of with the usual do-
so that it is mestic waste. They may contain toxic heavy metals
6
and are subject to hazardous waste treatment rules
by pulling it and regulations. The chemical symbols for heavy
9
metals are as follows: Cd = cadmium, Hg = mer-
cury, Pb = lead. That is why you should dispose of
used batteries at a local collection point.
EMC
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Environmental damage
through incorrect disposal
of the batteries!
Pb