Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MANUAL
LR-
If the measured value of the
gauge pressure sensor and vented test assembly, then the zero point for gauge pressure
sensors can be corrected via the "OFFSET CORRECTION"
the
TARE
key.
Return to the standard measuring mode by pressing the FUNC key several
Func
mes.
7. Maintenance, cleaning and recalibra on
7.1 Maintenance
Cal
This
LR-
LPC 200
Repairs must only be carried out by the manufacturer.
7.2 Cleaning
CAUTION!
•
Before cleaning, correctly disconnect the LPC-2 reference pressure
sensor
disconnect it from the mains.
•
Clean the
•
Electrical connec ons must not come into contact with moisture.
•
Residual media in dismounted LPC-2 reference pressure sensors or
temperature sensor can result in a risk to persons, the environment and
equipment. Take su cient precau onary measures.
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • DT-Info@Leitenberger.de •
Cal
Cal
LPC 200 +
LR-
Mode
Tare
calibrator
is not equal to zero, with the connected
Cal
/
LR-
LPC 200-T
and its sensors are maintenance-free.
from the pressure supply, switch
calibrator
with a moist cloth.
ff
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
LPC 200-T
Unit
FUNC
the calibrator
68
LPC-2
menu item by pres
sing
of and
f
www.LR-Cal.net
• www.druck-temperatur.de
Werbung
Inhaltsverzeichnis
