LR-Cal LPC 200 Bedienungsanleitung Seite 65

The USB interface is deac vated by switching o f the
USB interface once again, follow the process described above.
The
(included in standard delivery of model
Return to the standard measuring mode by pressing the FUNC key several
Func
mes.
6.8.3 Data source for Data logger (LOGGER SOURCE), model
Via the FUNC key various conigura ons can be achieved, e.g. the data source for the
data logger can be selected
Ac va ng the Data Source for Data Logger menu item (LOGGER SOURCE)
Pressing the FUNC
* If you are already in a
menu item appears on the display.
In the " LOGGER SOURCE FUNC
be selected. Via the
temperature " TEMP
Return to the standard measuring mode by pressing the FUNC key several
Func
mes.
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • DT-Info@Leitenberger.de •
Cal
LR-
PC-so ware LPC-Cal is available as calibra on and evalua
at model LR-Cal
key three mes* (directly within the measuring mode
FUNC menu item, press the
Mode
Tare
" menu item, the data source for the data logger can
MODE key pressure "
" is selected.
Cal
LPC 200 + LR-
f calibrator . In order to ac vate the
LR-Cal LPC 200-T .
LR-Cal
LPC 200-T .
FUNC key un l the „
Unit
PREAS " is selected, and via the
www.LR-Cal.net
65
MANUAL
LPC 200-T
- on so ware.
)
LPC 200-T
LOGGER SOURCE
UNIT key
• www.druck-temperatur.de
"