MANUAL
LR-
6
5
4
1. Ba ery level display
2. Current pressure measured value
3. Current unit and type of pressure
4. Minimum func on
The Minimum func on records and displays the lowest value since it was switched on
and is reset by switching the instrument on/of . f
5. Maximum func on
The Maximum func on records and displays the highest value since it was switched
on and is reset by switching the instrument on/o f. f
6. Bar graph
Return to the standard measuring mode by pressing the MODE key several
Mode
mes.
6.4.3 Measuring mode incl. the display of the pressure rate and op onal tempera-
ture (model
LR-Cal
Via the
MODE
key diferent func ons can be superimposed, e.g. the func on: Pressure
Rate (
RATE
).
With the
model
LR-Cal
can also be made, using
Pt100 resistance thermometer connected with this version, then the display shows
"Wai ng" instead of the temperature value.
Ac va on of the Pressure Rate func on RATE and op onal temperature display
Pressing the MODE key twice* (directly within the standard measuring mode) displays
the pressure rate and the temperature in
Pressing the MODE key three mes with
(directly within the standard measuring mode) displays the pressure rate and the temperature in .
ature in .
°F
* If you are in a different measuring mode than the standard measuring mode, press the
MODE
key un l the measuring mode with the PRESSURE RATE func on appears on the display.
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • DT-Info@Leitenberger.de •
Cal
Cal
LPC 200 +
LR-
Measuring mode with MIN/MAX func on
LPC 200-T)
LPC 200-T
an addi onal display of measured tempera
the supplied
external Pt100 resistance thermometer. If there is no
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
LPC 200-T
1
2
3
°C
.
the
external Pt100 resistance thermometer
60
ture
(LR-Cal
www.LR-Cal.net
• www.druck-temperatur.de
LPC 200-T)
°F